wear resistant ceramic adhesiv > high temperature resistant epoxy curing agent hardener

high temperature resistant epoxy curing agent hardener

BD10 high temperature resistant epoxy curing agent hardener

Product performance feature:
1. With low viscosity,small smell.
2. The adhesion of the adhesive layer is strong, the cohesive strength is high,toughness and close-grained.
3. After mixing with universal epoxy E-51,the heat resistant can reach to more than 300 deg C.BD10 high temperature epoxy curing agent is
the modified aromatic amines high temperature resistant curing agent,can be curing into common bisphenol A epoxy resin at room temperature,
the heat resistant of the cured products after heating up curing of common bisphenol A epoxy resin can reach to 300 deg C,the strength of
the cured products is high,the bonding force is good, usage period is long.

How to use:
The mixing weight ratio:E-51: BD10 = 100 : 25
Curing:Surface drying time: 4 hours,complete curing time: 24 hours (at room temperature),heating up for curing: curing for 2 hours at the
temperature of 80 deg C + curing for 3 hours at the temperature of 120 deg C.

Packaging,transportation and storage:
This product can be packed in iron drum or plastic drum,the net weight of each drum is 20 Kgs or 200 Kgs.
In the process of transportation,it is strictly forbidden to open cover and package damage, pay attention to moistureproof, avoid sunshine
and rain.This product should be stored in a cool and dry warehouse,the storage period is 12 months.
Exceed the time limit,after passing inspection,it can still be used.

The product performance index of BD10 high temperature resistant epoxy curing agent:

Appearance	Viscosity (25℃) mPa.s Test method:NDJ-1 rotational viscometer,number 4 rotor,6rpm	Density(25℃) g/cm3	freezing point (℃)	amine value mkoh/g	Toxicity LD
Amber Liquid	5000±1000	1.07±0.05	< -14	370-420	> 5000

Product packaging photo of our BD10 high temperature epoxy resin hardener curing agent:

------分隔线----------------------------